Re: APC Development and related topics.
 

Now in with survivability set to 7 and a new pic. We'll deal with side armour changes later

Re: APC Development and related topics.
 

Survivability 7 is probably a bit high given that the AAV doesn't have a 'V' hull and the floor armor is still only aluminium. But that and any armor upgrades can wait.

Re: APC Development and related topics.
 

They claim MRAP equivalence so it's a 7

Re: APC Development and related topics.
 

Since when has anyone believed manufactuerer claims :D

Re: APC Development and related topics.
 

She does look "beefed up" compared to the standard AAV. But here's what the USMC has to say about it. Looks like I spotted some shock mounting in the mechanical part (Don't think they're the "mains" though?) of the video. We live and die by that stuff on the boats.
http://www.marines.mil/News/News-Dis...-upgraded-aav/

You will find in this next video from SAIC one of the IED tests conducted on the AAV SU which is it's official designation as noted in the USMC ref above.
Already has a name isn't that special? :rolleyes:
http://www.saic.com/about/about-saic...tories/aav-su/

Did my part to pack out Mom today, chilling out and watching some closing ceremonies. Take Care!

Regards,
Pat

Re: APC Development and related topics.
 

That's what I've called it too..............

Re: APC Development and related topics.
 

I suspect it'll wind up being AAVP SU or AAV SUP for the APC variant, 'E' for the engineer, and 'C' for command.

Re: APC Development and related topics.
 

Tracking some new Chinese APC/IFV developments

Derivatives of ZBD-04 IFV (Unit 740)

Basically, China realized that once they'd fulfilled the need for the PLA Marine Corps to have a heavy amphibian IFV in the ZBD-04; the same chassis could be used for a land-based IFV; resulting in:

http://www.military-today.com/apc/zbd_08.htm

http://english.chinamil.com.cn/news-...nt_6682644.htm

ZBD-04A / ZBD-08 AIFV (Name is unclear, sources differ)

Which essentially is the ZBD-04 product improved to:

Hull:
Frontal: 30mm AP-I @ 1000m
Sides: 14.5mm AP-I @ 200m
Rear: 7.62mm AP

at the cost of greater weight (4 metric tons heavier than the 04) and only being able to swim rivers and lakes; as opposed to the 04's sea-amphibious capabilitity.

Some derivatives of this vehicle are showing up in C3I roles, etc.

Recently, ANOTHER prototype showed up on the Chinese Internet (TM).

http://china-defense.blogspot.hk/201...hting.html?m=1

It appears to be part of the developmental process for their "second generation" Airborne IFV to replace the ZBD-03; and they have abandoned the 100mm/30mm coaxial armament for 100mm/7.62mm coaxial in this prototype.

Re: APC Development and related topics.
 

Israel must be releasing/or confirming information on the EITAN 8x8 already out there, so by way of an update...
http://www.armyrecognition.com/israe..._10208163.html

Also something I've been keeping my eye on...
http://www.military-today.com/apc/ofek.htm

The above gives me a "warm fuzzy" on the "The Great MERKAVA troop carrying debate." I believe we settled on 6 fully equipped troops. It also confirms what we found as the high number of 10 troops at the time as well they can carry. And before someone gets a little "nuts" over this :deadhorse: topic, we realized then that from MERKAVA Mk III on, the tanks hulls were modified from the Mk II to allow for more space by increasing length and storage efficiency of ammo etc. etc..

This was a VERY HOT topic that would cause a person to receive the "death penalty" from both forums as I recall.

22 and a wake up - life is good!!

Have a good night - ready wrap up my work week later this afternoon/night! :jam:

Regards,
Pat
:capt:

Re: APC Development and related topics.
 

If anyone sees length and width stats for the Eitan let me know

Nevermind.....found it ( looking for a second source now but the proportions look good now compare to the top photo I have )

Dimensions of the Eitan
Length - 8.35m
Height - 2.62m
Width - 3.29m


http://forum.shrapnelgames.com/attac...1&d=1474116800