.com.unity Forums
Page 5 of 5 « First 34 5
Show 50 post(s) from this thread on one page

.com.unity Forums (http://forum.shrapnelgames.com/index.php)
-   Scenarios, Maps & Mods (http://forum.shrapnelgames.com/forumdisplay.php?f=96)
-   -   Working on a new mod (http://forum.shrapnelgames.com/showthread.php?t=22203)

Thilock_Dominus January 10th, 2005 05:57 PM
Re: Working on a new mod
 
First two screenshots

1515x1076
Main Page with the mod enable

Elven Archers

Thilock_Dominus January 10th, 2005 06:09 PM
Re: Working on a new mod
 
Quote:
Endoperez said:
I did that with MS Paint, and converted them using IrfanView. It works, but takes time.


To do it properly, run DomII in window, put filter off and set opacity to 100%. When I took screenshots this way, all the himans were exactly 32 pixels high, and I don't think I'm that lucky.

And as colors won't be deformed, you can remove two background-blacks, leaving the two shadow-blacks.
In what resolution did you ran?

Endoperez January 11th, 2005 12:32 PM
Re: Working on a new mod
 
1280x1028, but I tested it at 640xsomething and the result was same. When windowed, DomII seems to default to its "natural" resolution.

Thilock_Dominus January 11th, 2005 02:03 PM
Re: Working on a new mod
 
Okay, I'll give it a shot.

Arralen January 12th, 2005 05:48 AM
Re: Working on a new mod
 
Quote:
Endoperez said:When windowed, DomII seems to default to its "natural" resolution.
Unless you change the window size using the command line switch "--res xxx yyy". Make shure you keep the proportions, though http://forum.shrapnelgames.com/images/smilies/wink.gif

And I would suggest you use Irfanview to resize the pics, too. I don't know about Paint, but GIMP only uses none, linear or cubic interpolation. Irfanview has a whole bunch of different functions which you can try out for best results.
And doing a whole lot of pics with it is even easier - use the batch mode ...

Thilock_Dominus January 12th, 2005 04:44 PM
Re: Working on a new mod
 
Okay thanks. Infranview is only avaible for winblow, but there's a similiar program I found called XnView or I could run Infranview with crossoveroffice.


All times are GMT -4. The time now is 01:49 AM.
Page 5 of 5 « First 34 5
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©1999 - 2025, Shrapnel Games, Inc. - All Rights Reserved.