[Slick]

If I remember correctly, the Log message on the left looks like a successful retrofit. It says "Vehicle Retrofit". If you highlight that entry, the center panel of the Log will have the message that the retrofit failed.

Thus if you retrofit several ships, say 10, and you had enough $$$ for the first 4, there would still be 10 Log entries saying Vehicle Retrofit. In the center panel, the first 4 would say that the vehicle was retrofitted to the new design and the Last 6 would say that the retrofit failed due to insufficient resources.

You have to check each one to see if it was successful.

edit:
One more thing. I am sure you checked your retrofits for the 150% rule, but to be explicit, the 150% rule applies to the total retrofit which can only be seen in the retrofit screen . Total M+O+R is used as a basis before and after, however you can't just use raw cost of the 2 ships because of the cost to add and remove components (120% and 30% respectively from settings.txt). If your retrofit failed due to the 150% rule, it also would show Vehicle Retrofit on the left panel of the Log and you would have to highlight that entry to read the center panel to know that the retrofit failed due to the 150% rule.

Slick.

[ March 12, 2003, 10:06: Message edited by: Slick ]