Re: CD Burning Speed
Fyron you might want to check and see if UDMA is activated in device manager for the IDE channel that your CD burner is hooked up to.
Right click on My computer then pick manage
then pick device manager
somewhere in the device manager list it should say IDE controller
then expand that and look for primary and secondary ide channel... even if you don't know which one your CDR is on you should be able to look at the properties of both IDE channels. Under their advanced tabs make sure "DMA if available" is set. If the drives are not running in UDMA mode then that's most likely the problem as the drive is not getting information into it fast enough to burn at high speed...
Lemme know if that helps...
|