CEV's and Dragons teeth

[phil74501]

I can't figure out how to make my CEV's clear dragons teeth. Aren't they supposed to be able to do that? Am I missing a hot key that does the job? Thanks for any help.

[Imp]

Pretty sure the guide says engineers only for dragons teeth

[phil74501]

I thought the CEVs would do the same thing? If not, what good are they?

[iCaMpWiThAWP]

IF they are engineer tanks they can demolish buildings and clear obstacles(mines,wire,maybe DT, i can't remember right now),IF they are mineclear, they tanks are better at clearing mines and not so good at obstacles.

[Marcello]

Originally Posted by iCaMpWiThAWP

IF they are engineer tanks they can demolish buildings

Not really. You can ram them against a building and they will demolish it and get stuck (nearly always, especially if stone buildings) in the ruins. They behave exactly like every other vehicle in this regard. Game wise it does not make any difference if it is a pick up or a D9.

[iCaMpWiThAWP]

Originally Posted by Marcello

Not really. You can ram them against a building and they will demolish it and get stuck (nearly always, especially if stone buildings) in the ruins. They behave exactly like every other vehicle in this regard. Game wise it does not make any difference if it is a pick up or a D9.

Hum... so i must be lucky, i don't usually have my dozers stuck in buildings, i think its easier to get immobile on stone, wood is rather fragile

[Kartoffel]

Originally Posted by Marcello

Not really. You can ram them against a building and they will demolish it and get stuck (nearly always, especially if stone buildings) in the ruins. They behave exactly like every other vehicle in this regard. Game wise it does not make any difference if it is a pick up or a D9.

From the newest patch of SPWW2:

Originally Posted by DRG

3) Engineer type vehicles that deliberately rubble a building will show markedly less chance sticking when "bulldozing" buildings than regular tanks do.

It seems reasonable to assume that they will make this change to SPMBT in the next patch. As of now the engineer vehicles have no special demolishing powers.

[Imp]

Originally Posted by phil74501

I thought the CEVs would do the same thing? If not, what good are they?

Thet are good for clearing everything else. Think mine clearers work slightly faster vs mines. Dragons teeth need the men to blow them up or some such.

[Mobhack]

Originally Posted by phil74501

I can't figure out how to make my CEV's clear dragons teeth. Aren't they supposed to be able to do that? Am I missing a hot key that does the job? Thanks for any help.

1) Did you remember to point the engineer tanks at the dragons teeth hex? (leg engineers need to enter the D/T hex)

2) Did you then wait for several turns for the engineering works to complete?

- Mine clearing is subject to random factors, so engineer tank A may clear 3 D/T from a hex at a different rate than engineer tank B, all other factors being equal.

- being suppressed or worse can slow the work down or stop it altogether. Armoured vehicles are less easy to suppress than leg engineers, though.

- Engineer tank class clears D/T better than Mine-clear tank class (vice versa for mines of course).

- There may be more than one D/T unit in the hex. Plus mines (1+ units) too. (The AI's bridge blocker with a D/T usually has a mine too).

Cheers
Andy

[phil74501]

My CEVs just bypass the hexes. I think I even tried using the shift key to get them to move into the hexes with the dragons teeth in them. Still didn't work.

I'm playing a scenario that has a bunch of them in it. I messed with them, but couldn't get them to work. Least not the way I thought they were supposed to work.