OT: Found An Interesting Program

[Atrocities]

Originally posted by Narrew:

quote:

---

Originally posted by Baron Munchausen:
A mainboard operating at 62 Celcius? But the MB at 62 C is a shocker if that's true. I'd be afraid your CPU is running at 80 C or more and is in danger.

When I saw that, I figured that it was a typo, hopefuly it is, otherwise he will be getting a new CPU and MB soon.

---

No it was not a typo. That is the actual temp verified by another program.

Currently:
Temperature Sensor(s)
Board Temperature : 59.0°C / 138.2°F td

SiSoftware Sandra

System
Manufacturer : HP Pavilion 06
Model : DF247A-ABA 725N


System Chassis
Manufacturer : Chassis Manufacture
Type : Desktop
Can be locked : No
Version : Chassis Version
Serial Number : Chassis Serial Number
Asset Tag : Asset-1234567890
Boot-up State : Safe
Power State : Safe
Thermal State : Safe
Security State : External Interface Locked-out

Mainboard
Manufacturer : ASUSTeK Computer INC.
MP Support : No
Model : A7N8X-LA
Version : 1.04
Serial Number : X312345678

On-board Devices
To Be Filled By O.E.M. : Video Adapter

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 1GB
BANK0 - DIMM0 : Manufacturer0 PartNum0 SerNum0 AssetTagNum0 DIMM 512MB/128 @ 100Mt/s
BANK1 - DIMM1 : Manufacturer1 PartNum1 SerNum1 AssetTagNum1 DIMM 256MB/128 @ 100Mt/s

Chipset 1
Model : ASUSTeK Computer Inc nForce2 AGP Controller
Bus(es) : ISA AGP PCI USB FireWire/1394 i2c/SMBus
Front Side Bus Speed : 2x 133MHz (266MHz data rate)
Width : 64-bit

Logical/Chipset 1 Memory Banks
Power Save Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : Smart Modular SM5643285D8N6CLIBH 256MB 8x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)
Memory Module 2 : Kingston 70074C15 512MB 16x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 59.0°C / 138.2°F td

Voltage Sensor(s)
CPU Voltage : 4.08V
Aux Voltage : 4.08V
+3.3V Voltage : 4.08V
+5V Voltage : 6.85V
+12V Voltage : 15.91V
-12V Voltage : 4.01V
-5V Voltage : 4.05V
Standby Voltage : 6.85V
Battery Voltage : 4.08V

AGP Bus(es) on Hub 1
Version : 3.00
Speed : 8x
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit

PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 2
PCI Bus 0 : PCI (1x PCIClk)
PCI Bus 1 : PCI (1x PCIClk)

LPC Hub Controller 1
Model : ASUSTeK Computer Inc nForce2 ISA Bridge
ACPI Power Management Enabled : No
Random Number Generator Enabled : No

USB Controller 1
Model : ASUSTeK Computer Inc nForce2 OHCI USB Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : ASUSTeK Computer Inc nForce2 OHCI USB Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : ASUSTeK Computer Inc nForce2 EHCI USB 2.0 Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

FireWire/1394 Controller 1
Model : ASUSTeK Computer Inc nForce2 FireWire Controller
Version : 1.10
Interface : OHCI
Enhanced Support : Yes
Channels : 64
Speed : 400MHz

System SMBus Controller 1
Model : nVidia MCP2/3 B0 SMBus
Version : 0A.02
Slave Device Enabled : No

System SMBus Controller 2
Model : nVidia MCP2/3 B1 SMBus
Version : 0A.02
Slave Device Enabled : No

Expansion Slot(s)
AGP : AGP-4x 32-bit +3.3V Shared PME Half-Length Used
PCI1 (1h) : PCI 32-bit +3.3V Shared PME Half-Length Available (ASUSTeK Computer Inc nForce2 ISA Bridge)
PCI2 (2h) : PCI 32-bit +3.3V Shared PME Half-Length Available (ASUSTeK Computer Inc nForce2 OHCI USB Controller)
PCI3 (3h) : PCI 32-bit +3.3V Shared PME Half-Length Used

Port Connector
J1A1 - PS2Mouse : Mouse - None / PS/2
J1A1 - Keyboard : Keyboard - None / PS/2
J2A2 - USB1 : USB - None / USB
J2A2 - USB2 : USB - None / USB
J4A1 - LPT 1 : Parallel Port ECP/EPP - None / DB-25 pin male
J2A1 - COM A : Serial Port 16550A - None / DB-9 pin male
J6A1 - Audio Mic In : Audio - None / Mini-jack
J6A1 - Audio Line In : Audio - None / Mini-jack
J6B1 - AUX IN : Audio - CD-ROM Sound Input / None
J6B2 - CDIN : Audio - CD-ROM Sound Input / None
J6J2 - PRI IDE : None - ATA / None
J6J1 - SEC IDE : None - ATA / None
J4J1 - FLOPPY : None - Floppy Disk / None
J9H1 - FRONT PNL : None - 9 Pin Dual Inline / None
J1B1 - CHASSIS REAR FAN : None - None / None
J2F1 - CPU FAN : None - None / None
J8B4 - FRONT FAN : None - None / None
J9G2 - FNT USB : None - None / None
J6C3 - FP AUD : None - None / None
J9G1 - CONFIG : None - None / None
J8C1 - SCSI LED : None - None / None
J9J2 - INTRUDER : None - None / None
J9G4 - ITP : None - None / None
J2H1 - MAIN POWER : None - None / None

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
Warning 2545 : Large memory modules should be Registered/Buffered.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2518 : Mainboard temperature is too high.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

[ December 22, 2003, 22:01: Message edited by: Atrocities ]