|
|
|
|
 |
February 7th, 2003, 03:18 AM
|
 |
Major
|
|
Join Date: Aug 2000
Posts: 1,246
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
Re: just tried this out
anyone know any linux? Im trying to figure out how to access my C drive after I boot from this CD.
__________________
When a cat is dropped, it always lands on its feet, and when toast is dropped, it always lands with the buttered side facing down. I propose to strap buttered toast to the back of a cat. The two will hover, spinning inches above the ground. With a giant buttered cat array, a high-speed monorail could easily link New York with Chicago.
|
February 7th, 2003, 04:01 AM
|
 |
Colonel
|
|
Join Date: Dec 1999
Location: Bakersfield CA USA
Posts: 1,524
Thanks: 7
Thanked 15 Times in 13 Posts
|
|
Re: just tried this out
Basicly:
/dev/hda for the first disk
/dev/hdb for the second
/dev/hdc for the third
/dev/hdd for the fourth
There's a lot more to it than this...such as you may have to mount the drive...
Also, depending on the distro, you may not be able to "see" a windows drive.
Normally linux CD distros are just to try out the linux system itself, or to tie in some way with a more secure system.
|
February 7th, 2003, 05:30 AM
|
 |
Shrapnel Fanatic
|
|
Join Date: Jul 2001
Location: Southern CA, USA
Posts: 18,394
Thanks: 0
Thanked 12 Times in 10 Posts
|
|
Re: just tried this out
Instar, no, I don't think MS would let you run any of their OS without installing it first.  |
February 7th, 2003, 07:27 AM
|
|
Major
|
|
Join Date: Aug 2000
Posts: 1,246
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
Re: just tried this out
according to Dynebolic, I should be able to read FAT16, 32, and NFTS
among others
thanks!
__________________
When a cat is dropped, it always lands on its feet, and when toast is dropped, it always lands with the buttered side facing down. I propose to strap buttered toast to the back of a cat. The two will hover, spinning inches above the ground. With a giant buttered cat array, a high-speed monorail could easily link New York with Chicago.
|
February 7th, 2003, 08:37 AM
|
|
Corporal
|
|
Join Date: Dec 2002
Posts: 137
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
Re: just tried this out
There is a setting in the CMOS, before the OS is loaded, that tells the computer what drive(s) to check for the OS, and it can generally be changed. If you watch the boot up process, early on there is generally a brief line that says something like "press F10 to enter setup" or some such - I don't recall exactly. Could be delete. Anyway, pressing that button in the (very) short time the machine is responsive to that function will bring up a menu from which you should be able to tell the computer which drives to check on boot up. Hope this helps....
__________________
As always, comments and suggestions are welcome.
Get my Runesword II tomes from my website
|
February 8th, 2003, 02:07 AM
|
|
Major
|
|
Join Date: Aug 2000
Posts: 1,246
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
Re: just tried this out
Well, I had to do that in order to get the Dynebolic CD to boot up in the first place, thanks
__________________
When a cat is dropped, it always lands on its feet, and when toast is dropped, it always lands with the buttered side facing down. I propose to strap buttered toast to the back of a cat. The two will hover, spinning inches above the ground. With a giant buttered cat array, a high-speed monorail could easily link New York with Chicago.
|
February 14th, 2003, 11:17 PM
|
|
Sergeant
|
|
Join Date: Feb 2003
Location: Tacoma, WA
Posts: 356
Thanks: 3
Thanked 5 Times in 3 Posts
|
|
Re: just tried this out
you need to MOUNT the drives each time you run Linux (usually by a bat file/script during the boot process). You will need to do that each time since you are booting from a CD and the file you would need would be loaded on the CD to read from as it boot. Linux takes me back to the DOS days, and I doubt that your CD would have updated drivers for your vid card.
I would suggest getting a removable HD bay and just load it on a spare drive.
Good luck friend.
|
| Thread Tools |
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
|
|
