OT- DVD drive trouble

Fyron · #1 March 18th, 2006, 08:20 PM

There are drivers that should get installed via plug'n'play when the drive is attached. Find out what they should be for your drive and install them manually.

Saber Cherry · #2 March 18th, 2006, 08:49 PM

I can't assert that this will solve anything, but I suggest that - in this order - you:

1) Get the latest bios for your motherboard, and install it.
2) Get the latest chipset drivers (from NVidia, maybe? Via? Whoever made the MB chipset.), and install them.
3) You need to update to XP Service Pack 2 whether or not you you do steps 1 and 2!

I give it a 50-60% chance of success.

Randallw · #3 March 18th, 2006, 10:42 PM

Well I have SP2. I don't know if I want to risk mucking about with the bios, I came across a warning not to if I don't know what I am doing. I am sending a message to the manufacturers to find out once and for all what drivers I need to install to make the plug and play work. problem is the page won't load once I submit so i don't know if they are getting it.

Saber Cherry · #4 March 19th, 2006, 12:02 AM

Quote:

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp2_gdr.040517-1325)

My mistake - Windows can't even correctly identify its own version

If you look closely, you'll see the term "Service Pack 1" AND the term "xpsp2" so I guess you can assume that the larger one is probably correct.

Bios upgrades, by the way, should not be considered 'unnecessary'... most mainboards are made in Taiwan (maybe some in Korea), and have REALLY crappy quality. You're actually lucky your capacitors haven't blown up yet, after 3 years. Regardless, the bios that ships with the board often does not offer complete functionality, and is full of bugs. The only software that directly deals with your USB functionality are the motherboard bios (comes from MB manufacturer - they will have detailed instructions on the website, poorly translated from Chinese, but legible), the chipset drivers (come from the chipset mfgr, almost certainly nVidia or Via, and they are much easier to install with much better instructions), and Windows.

It's possible you have bad USB ports, a defective motherboard, or a defective drive. Or Starforce / some other virus is messing up your hardware. But it's just as likely that the bios is the problem, and if you want to use a USB drive, you'll have to update it.

Bios flashes aren't really dangerous - you're more likely to damage your computer by vaccuming near it or knocking a speaker onto it. I've encountered both of those but never heard of a bios-flash that caused unrecoverable problems.

Randallw · #5 March 19th, 2006, 05:28 AM

Quote:

Saber Cherry said:

It's possible you have bad USB ports, a defective motherboard, or a defective drive. .

I haven't had trouble with my usb ports till now. I run my modem, camera and scanner out of them. I wonder if perhaps it can't use them since they are devoted to what I already have, but the modem and scanner share the same port with no trouble, except I have to swap leads depending on what I use.

Randallw · #6 March 19th, 2006, 05:57 AM

here is a bios agent report

I am assuming the motherboard is AMD.

http://www.amd.com/us-en/Processors/...calResources/0,,30_182_871_2336,00.html

only the drivers available are older than my computer.

I'm pretty certain the chipset is nvidia but their website appears not to have any drivers.

Saber Cherry · #7 March 19th, 2006, 06:21 AM

Quote:

Randallw said:
here is a bios agent report

I am assuming the motherboard is AMD.

I'm pretty certain the chipset is nvidia but their website appears not to have any drivers.

Yes, you have an NForce chipset, but AMD does not make motherboards.

You can get your chipset drivers here:

http://www.nvidia.com/content/drivers/drivers.asp

But unfortunately I don't know which chipset you have. The drivers are different for nForce 1, 2, 3, and 4. nVidia doesn't seem to offer a tool that identifies it for you and the serial number means nothing to me.

You need to look at your motherboard manual (if you have one) or your computer owner's manual, or your receipt, or something... somewhere it will tell you the exact brand and model of your motherboard and chipset. The motherboard brand will be something like "Asus" or "Asrock" or "Abit" or "Soltek" or "Soyo"; something that a computer might randomly pick when autogenerating names by randomly concatenating phonemes.

If you don't have any of the original documentation or manuals, the name of the chipset and manufacturer are both written on the motherboard, but may be hard to find with all the other words written on it.

Fyron · #8 March 19th, 2006, 05:48 PM

Quote:

Randallw said:
I wonder if perhaps it can't use them since they are devoted to what I already have...

It isn't possible to have USB ports devoted to a single device.

Saber Cherry · #9 March 20th, 2006, 12:03 AM

Ok, so download this zip from Soltek:
http://www.soltek.com.tw/soltek/down...l/75FN220L.zip

It comes with a readme and a flash utility (I looked

so just follow the directions.

Then reboot, and go here:
http://www.nvidia.com/content/drivers/drivers.asp

and follow this trail:

platform/nForce Drivers
nForce 1/2
Windows XP

download those and install them.

If it still does not work after that, post again, and I'll tell you how to get rid of StarForce and spyware that might be causing the problem.