OT: New PC!

[Thermodyne]

JAFisher44 said:
The only reason to use liquid cooling is if you are going to overclock your PC (which you should not do)

This is what RAID is, http://computer.howstuffworks.com/scsi6.htm

Raid has nothing to do with SATA. It is a backup system for SCSI.

Why should you not OC your system? Why not buy a cheaper low end chip and run it at the same speed as the high end parts?


Water cooling is a viable upgrade to air cooling; some of the cooling tower kits are quite nice. Air is the most dependable, but can have some limitations with today’s chips during hot weather. The next step up and the first to really be advanced cooling would be water cooling with pelts. The pelt chills the CPU and electronically moves the heat the water cooled side of the pelt. These work well, but can have some condensation issues and are not cheap. The top of the line is phase change. This method uses refrigeration equipment to chill the CPU down to around -30c at start up and maintain temps around 0c to 15c during normal operation. Again, condensation can cause problems and the cost of the chiller would buy you a nice mid level PC.


That is one use of raid. It is not only for SCSI systems, it can be used with IDE SCSI and SATA. The board in question includes a SATA raid chip and SATA is faster than IDE, so naturally you would go with SATA raid. For performance, you would build a stripe set so that you could use the bandwidth of both drives at the same time. If you were interested in data integrity, then a mirror would be better with each drive having exactly the same data. With three or four drives, a raid 5 would give you some of both. A little more speed and almost the same data integrity.

Your last statement is at best, uninformed, and as such should be removed.