Dominions II: Technical/Hardware Issues

slimemold · #1 September 30th, 2004, 04:54 PM

Ok, I tried patching from 2.02 to 2.13 (Mac OS X) but got the same iPatch error. I found the 2.13 patch from a google search that pointed me to filefront.com.

Searching in this forum turned up some advice about manually copying files from the patch into the application bundle, but that was 2.08, before iPatch was in use (as far as I can tell).

Looks like I'll have to do some messy trial-and-error on older Versions. I don't suppose someone could bundle up the diffs between what's on their CD and what's on their hard drive and post it somewhere?

Incidentally, the fact that this game (and its patches!) were released for Mac was instrumental in my decision to replace my recently exploded PC laptop with a Mac!

Thanks for any help.

Johan K · #2 October 1st, 2004, 05:17 AM

Have you tried to do it this way:?
* Copy Dominions application from CD
* Make sure all files are not write protected
* Apply 2.14 patch
* If that didn't work, apply 2.13 patch first

You can't patch by copying files manually with the iPatch patches.

The iPatch people say they will have a new Version of iPatch ready in a few weeks that lists what went wrong with which files if the patch doesn't work. So hopefully the next Dominions patch for mac will use this new and improved patcher.

slimemold · #3 October 1st, 2004, 12:49 PM

Problem solved! Dominions 2.02 gets installed in read-only mode. iPatch doesn't override the read-only flag. Before running iPatch, it is necessary to Command-I on the installed dominions2 application and set it to read/write. Then iPatch works fine, straight from 2.02 to 2.14.

Hopefully, iPatch's upcoming new Version will have a more helpful error message, or be able to override read-only (probably a security violation/impossibility, though).

Thanks for the help, Johan!

Grim Knight · #4 October 25th, 2004, 05:45 AM

Does anyone here have any experience with getting a server setup behind a firewall?

Specifically I am trying to get it setup so that people can connect to my server, which is behind a Netgear Prosafe FVS318 firewall router.

So far I have tried setting up port forwarding, and setting the IP address of the machine acting as the server to DMZ in both cases when I try to connect to the Dominions 2 Game that I have it hosting using the Public IP address of my cable modem it can not connect, when I use the private IP address of the server machine of course it works fine.

It seems to be an issue with Port Forwarding, or with the game listing only for packets sent to the IP address it detects when you create the game, (It of course detects the private IP of the Machine it is running on rather than the Public IP of the cable modem).

I am trying to run the server on Windows 2000 Pro SP4.

If anyone knows a way around this I would be very happy.

Thanks in advance, Grim Knight

Grim Knight · #5 October 25th, 2004, 05:50 AM

In addition I have only been able to try to connect to it from a different machine that is behind the same firewall.

Is it possible that a machine outside of my LAN could connect to the Public IP when my machine inside the LAN can only connect to the private IP?

If anyone wants to try to connect to the server it is currently running.

IP Address: 69.10.118.53
Port: 65000

Thanks again, Grim Knight

deccan · #6 October 25th, 2004, 06:30 AM

I just tested it and I could connect. And I'm in the Solomon Islands. If I can connect, I bet anyone can connect.

Grim Knight · #7 October 25th, 2004, 10:22 AM

Cool, thanks deccan.

Grim Knight

PyroStock · #8 December 6th, 2004, 07:25 PM

Sometimes during battle scenes my game freezes up and forces me to cold boot. I have the latest graphic drivers (Nvidia 66.93), directx9c and the 2.14 patch on Windows2000. I don't play Online.

The culprit appears to be something from the following applications that occur at the same time the game freezes...

Information - ccEvtMgr 7:21:56 (from NT Authority/System, no specifics)
Information - ccEvtMgr 7:21:57 (same as above)
Warning - WinMgmt 7:22:39 (WMI ADAP was unable to create object index 2022 for Performance Library MSDTC because no value was found in the 009 subkey)
Error - PerfNet 7:22:40 (Unable to open the Server service. Server performance data will not be returned. Error code returned is in data DWORD 0.)

Disabling Norton did not help. Uninstalling/reinstalling did not help. Changing graphic options did not help, disabling sound (via -s) did not help & this only happens with Dominions2 as no other games/software freezes everything and causes me to reboot.

Suggestions?