RUSSIAN CIVIL WAR II - Multiplayer "User vs AI" Campaign

[Double_Deuce]

Comrade Brian61, your next mission in the campaign is attached . . .

Comrade, congratulations on your capture of the bridge at Arka. You must continue your advance, clearing the road south towards Simga. There is an important Rail Transfer Station to your south that need to be secured.**

Our spies tell us the Whites are preparing to destroy sections of the rail to prevent us from keeping up with their rearguard. The weather is expected to be clear.**

An armored train is closely following your main force and this will support your efforts with 2x 76mm field guns.**

You will have 15 Repair Points for this mission. When you add the Scenario to your Campaign, set the BUILD points for Node 002 to 15. Make sure you SAVE again after doing this.**

Mission #02

Install instructions:

1) Unzip the C041_RED_ACTIONS_Brian61_002.zip file.
2) add U041i002.txt file to your winSPWW2 Campaigns folder.
3) add spscn052.cmt and spscn052.dat to your winSPWW2 Scenarios folder.
4) Start up your winSPWW2 game. Edit campaign 041 RED_ACTIONS Brian61 by adding scenario 052 into node 002 (the third scenario slot).
5) EDIT your BUILD points for Node 002 to 15.
6) Save your edit by pressing SAVE in the lower right hand side corner of the screen.
7) Save again. Make sure you have done this - if your edit (adding of next scenario) is not saved the campaign ends.

Go back to your Saved Game file and continue the Campaign.

AGAIN: Make sure that you save the game before the battle ends, ideally the very last turn BEFORE the end result screen is shown. I would recommend saving to alternate slots each turn, just in case.

Please post your end game screen file here or email it to me at doubledeuce@combat-campaigns.com

[Double_Deuce]

Comrade Roman, your next mission in the campaign is attached . . .

Having penetrated the enemy's right flank north of Zapadnyy, you have been ordered to drive northeast and sweep in towards the coast to close the enemy's route of retreat along the Tsentral'nyy - Chil'Chikan Causeway. Once you reach the causeway you are to continue pushing southwest and clear the road and the Tsentral'nyy - Chil'Chikan Railway of any advancing enemy.**

Although Comrade Skirmisher failed to destroy the enemy at Zapadnyy he did manage to inflict enough damage to force them to withdraw towards Tsentral'nyy. This means that you can expect a large force moving your way as they fall back towards Chil'Chikan.**

You will have 23 Repair Points for this mission. When you add the Scenario to your Campaign, set the BUILD points for Node 002 to 23. Make sure you SAVE again after doing this.**

Mission #02

Install instructions:

1) Unzip the C044_RED_ACTIONS_Roman_002.zip file.
2) add U044i002.txt file to your winSPWW2 Campaigns folder.
3) add spscn082.cmt and spscn082.dat to your winSPWW2 Scenarios folder.
4) Start up your winSPWW2 game. Edit campaign 044 RED_ACTIONS Roman by adding scenario 082 into node 002 (the third scenario slot).
5) EDIT your BUILD points for Node 002 to 23.
6) Save your edit by pressing SAVE in the lower right hand side corner of the screen.
7) Save again. Make sure you have done this - if your edit (adding of next scenario) is not saved the campaign ends.

Go back to your Saved Game file and continue the Campaign.

AGAIN: Make sure that you save the game before the battle ends, ideally the very last turn BEFORE the end result screen is shown. I would recommend saving to alternate slots each turn, just in case.

Please post your end game screen file here or email it to me at doubledeuce@combat-campaigns.com

[Double_Deuce]

ANOTHER FYI. You CANNOT Expand your current force. You can only REPAIR your existing Core.

[Double_Deuce]

Comrade iCaMpWiThAWP, your next mission in the campaign is attached . . .

Comrade, your forces have stopped the enemy advance cold. Now the time has come to counterattack and drive them back towards Partizanskiy however there is a choke point where they may be able to easily stop you. You will need to clear this area and make sure to way is open along the Partizanskiy - Ul'beya coastal roadway.**

In addition to the White force invaders local peasants have reported seeing both Japanese and British Interventionist troops maneuvering in the area. As with the Whites these foreigners are to be targeted as enemy's of the state. The weather is expected to be clear.**

You will have 24 Repair Points for this mission. When you add the Scenario to your Campaign, set the BUILD points for Node 002 to 24. Make sure you SAVE again after doing this.**

Mission #02

Install instructions:

1) Unzip the C043_RED_ACTIONS_iCaMpWiThAWP_002.zip file.
2) add U043i002.txt file to your winSPWW2 Campaigns folder.
3) add spscn072.cmt and spscn072.dat to your winSPWW2 Scenarios folder.
4) Start up your winSPWW2 game. Edit campaign 043 RED ACTIONS iCaMpWiThAWP by adding scenario 072 into node 002 (the third scenario slot).
5) EDIT your BUILD points for Node 002 to 24.
6) Save your edit by pressing SAVE in the lower right hand side corner of the screen.
7) Save again. Make sure you have done this - if your edit (adding of next scenario) is not saved the campaign ends.

Go back to your Saved Game file and continue the Campaign.

AGAIN: Make sure that you save the game before the battle ends, ideally the very last turn BEFORE the end result screen is shown. I would recommend saving to alternate slots each turn, just in case.

Please post your end game screen file here or email it to me at doubledeuce@combat-campaigns.com

[Double_Deuce]

Comrade Roman, your next mission in the campaign is attached . . .

Comrade Roman, having helped Comrade Skirmisher crush the main western line of the White forces you are to continue the advance to the Northeast to the village of Chekistskiy. Comrade Skirmisher will be on your left flank attacking the enemy in the hills to the North and trying to draw forces away from the village. Our spies report that Chekistskiy is occupied but has not yet been fortified.**

The attack will take place around noon. The weather is expected to be clear. **

You will have 19 Repair Points for this mission. When you add the Scenario to your Campaign, set the BUILD points for Node 003 to 19. Make sure you SAVE again after doing this.**
**

Mission #03

Install instructions:

1) Unzip the C044_RED_ACTIONS_Roman_003.zip file.
2) add U044i003.txt file to your winSPWW2 Campaigns folder.
3) add spscn083.cmt and spscn083.dat to your winSPWW2 Scenarios folder.
4) Start up your winSPWW2 game. Edit campaign 044 RED_ACTIONS Roman by adding scenario 083 into node 003 (the fourth scenario slot).
5) EDIT your BUILD points for Node 003 to 19.
6) Save your edit by pressing SAVE in the lower right hand side corner of the screen.
7) Save again. Make sure you have done this - if your edit (adding of next scenario) is not saved the campaign ends.

Go back to your Saved Game file and continue the Campaign.

AGAIN: Make sure that you save the game before the battle ends, ideally the very last turn BEFORE the end result screen is shown. I would recommend saving to alternate slots each turn, just in case.

Please post your end game screen file here or email it to me at doubledeuce@combat-campaigns.com